STRUTZ CS150 High Production Body/Shoulder Decorator

The CS-150 is a fully automatic machine that can decorate both body and shoulder areas of beverage bottles with color-to-color registration accuracy of +/- 0.2 mm; 2, 3 or 4 colors; and speeds up to 150 b.p.m. The CS-150 decorator represents the state of the art in high speed screen printing equipment with its carousel-style bottle steady, captured cam loader/unloader and non-contact squeegee safety system. Individual squeegee timing is controlled by means of a programmable controller which provides a highly responsive body and shoulder squeegee operation at each decorating station. Accessories available for the CS-150 include: Electronic Color Dispenser, Stackers and Single Liners. 


CS-150 Bottle Limit Specifications

Body Hgt. (Max) Body Hgt. (Min) Body Dia. (Max) Body Dia. (Min) Shoulder Dia. (Max) Shoulder Dia. (Min)
Narrow Neck 13.500" 3.000" 3.750" 1.750" 3.250" 1.062"
Wide Mouth 12.000" 3.000" 3.750" 1.750" 3.250" 1.062"

CS-150 Standard Features

  • Available in 2, 3 or 4 colors
  • Straight line production flow for operator convenience
  • Operates at speeds up to 150 bottles per minute with automatic power-in/out feed
  • Programmable controller for precise squeegee timing
  • Pneumatic squeegees permit dial-in pressure for consistent quality decoration
  • Non-contact squeegee safeties
  • Load/Unload carousel style bottle steadies for high speed bottle transfer
  • Complete mechanical movement for load and unload
  • New style compression spring bottle tension grippers
  • Loading and unloading take place at each end of the decorator, shortening the carrier conveyor and reducing indexing weight
  • Automatic carrier interlock assures color-to-color registration when seam registration is not required
  • For seam-to-color registration, automatic carrier interlock requires only single registration. This eliminates the need to re-register the seam at each decorating station.
  • NEW! Carrier conveyor, four strand design, with chain covers and positive carrier tracking guides
  • Captive chuck carriers designed with easily adjustable finish holder with snap-on/off base cups
  • Individual precision stroke setting accomplished quickly with easy-access wheel
  • Pre-wired and pre-piped for easy installation of electrical and pneumatic service connections
  • Standard 15 HP on 2-3 color; 20 HP on 4 color; 230-460 volt drive motor can operate ancillary equipment for total tie-in (other voltages available)
  • Capable of using organic and inorganic colors
  • Mechanical overload protection with pin point panel mounted indicating lights
  • Minimal down time for job changes
  • Extra heavy-duty costruction designed for 24-hour high speed operation
  • CS-150 Optional Features

CS-150 Optional Features

  • Storage Conveyor/Single Liner
  • ECD-1/ECD-2 Automatic Electronic Controlled Color Dispensing System
  • Lehr Pull-Bar or Push-Bar Stackers
  • Dual Feed Bi-Directional Push Bar Stacker System
For more information, contact us at:
Strutz International, Inc.
440 Mars-Valencia Road
P. O. Box 509
Mars, PA 16046 U.S.A.
Phone: 724-625-1501
Fax: 724-625-3570
Return to Strutz International, Inc.